Clamshell Blog

China’s pharmaceutical packaging machinery, high-end level and that the difference was not significant, some equipment has been with the current progress of the world’s latest technology to achieve the synchronization, but the overall level or with foreign advanced level there is not a small gap.

At present, China’s pharmaceutical packaging machinery has been to fill the basic category and the basic skills gap, but in product R & D funding sources, test conditions, product stability, automatic control, with China still lags behind the international advanced level. In the automatic control technology, foreign pharmaceutical packaging machinery has been largely achieved intelligent, user-friendly design, while China’s pharmaceutical packaging machinery in the PLC control, interface control relatively backward. Apart from the use of PLC control technology, must also be in materials, design and all relevant supporting all aspects to make choices is possible to achieve intelligent control. At the same time, China’s pharmaceutical packaging machinery is still relatively lacking in stability, which may lead to product quality issues, and affect the entire packaging line.

Superior stability of pharmaceutical packaging machinery for the production large variety of medical products manufacturing enterprises, it is a very critical requirement, because the equipment may easily lead to instability and affect the production of cut-off break. Affect the stability of pharmaceutical packaging machinery main factors are materials, components and basic gear. First, the materials and components of the low-level configuration will seriously affect the stability of the device, but there are some companies out of our country to consider the procurement of low-cost and even low-quality materials and components. Second, the packaging machine on the basis of gear that affects the stability of packaging machinery one of the factors. At present, China’s pharmaceutical packaging equipment essential to chain, tugs, placed the main stalk and other basic gear, it will be brought to the mechanical stability of the hidden dangers, while the foreign pharmaceutical packaging machinery has basically adopted the servo drive systems. It should be said, companies choose a servo motor is not a very difficult thing, but businesses often will take into account the introduction of the potential cost pressure servo motor. Enterprises from the traditional application of servo motor drive mode switch, thus need to other agencies or equipment is also supporting servo motor, so that along with the improvement of control accuracy, the cost increases as a result, many pharmaceutical companies can not afford to bear.

As sub-installed, for example, the earliest sub-installed production capacity of 40 bottles per minute, followed by 60 bottles per minute, until grown to 120 bottles per minute. Abroad similar equipment in our pursuit of 60 bottles / min production speed, reached 300 bottles / min. China’s installed capacity to conduct independent research and development sub-Hafei Group’s products, every minute of production and equipment functions with foreign equipment, there was no difference, but not superior stability. If similar foreign sub-installed equipment on the 300 bottles / min production rate of production to achieve stability, then the domestic production of similar equipment is generally only stable at speed of 280 bottles / min.

Longer plastic packaging machine, for example, China-made plastic packaging machine, compared with foreign countries are lagging far behind, reflecting the work of each individual part. For example, China’s production of plastic packaging machines reticulate lines deep and uneven. For another example, feeding process at home and abroad on various types of packaging machine is a very critical and the relatively weak links, but in comparison with foreign countries, China’s pharmaceutical packaging machine loading process is even more weak. Our country still Rolling Brush-type plastic packaging machine, which incorporates a special feeding process dedicated machines. Material production processes on the last run of capsules, for example, domestic equipment production per minute of 600 tablets, 700 tablets per minute ~ 800, while the foreign plastic packing machine feeding process can be achieved in 2000 tablets / minute production rate.

The materials used, processing means and institutions supporting the coordination of other factors, directly affect the production of plastic packaging machine speed and operational status.

The current global pharmaceutical packaging machinery is moving more in line with the direction of GMP certification. For the pharmaceutical packaging machinery, the depth of the direction of development is faster, more stable, higher levels of automation and control, operation is more humane, more convenient and easier cleaning and so on. How do the depth direction along the GMP certification to develop, as well as the middle of the development strategy, needs China Pharmaceutical Packaging Machinery Industry in-depth thinking.

Plastics Industry Association, Wenzhou City, December 21, 2009 afternoon at Victoria Hotel, held its third multi-purpose hall The Third General Assembly, chaired by the Secretary Youyu Masamitsu, the General Assembly first heard Shao Tai-ching, president of the association in 2009 Work Summary and 2010 work plan (proposal), then the Secretary-General to report to I Zhengguang Association 2009 annual financial revenue and expenditure reports, executive vice president Jiang Kang took the city of Personnel Set [2009] No. 140 document “Personnel on the disclosure of Wenzhou City, Sun Yong Ye, etc. 43 Comrade Plastic molding, junior professional and technical positions notification of qualification “and issued a certificate. The meeting was carried out by Gold Fields Limited to “adhere to the scientific development of a new high,” New Material Co., Ltd. Zhejiang Toshiji as a “strong business strategy to promote implementation of talent Toshiji leaps and bounds,” Packing Co., Ltd. Zhejiang stone as “About Gold in the management of the development of some of the feelings and understanding, “Huatai Group Co., Ltd. as” during difficult times to find a new rise “of the typical speech, followed by the Song Yunhe, executive vice president as” Wenzhou City, the plastics industry in 2009 and the next step of the development operation The proposal “statement. Finally, the city of civil society organizations will be the Secretary for the Board Zhang Gao gave an important speech to the City Personnel Director Ling will be the beginning of the guide, city tour of Poly Sen Economic and Trade Commission deputy director of Economic and Trade Commission meeting in the city to meet with you later. Meeting in a warm atmosphere after completing its agenda declared closed.

Tuesday (January 5) Dalian plastic (LLDPE) futures extended early New Year’s first trading day rally, the major 1005 contract opened at 12.72 thousand yuan / ton, to close at 12.66 thousand yuan / ton, up 12,745 yuan / ton, the lowest 12.62 thousand yuan / t, to close up 25. However, the weak demand side is still a significant resistance to the market upward.

The New York Mercantile Exchange (NYMEX) crude oil futures higher on the 5th. 6, the Energy Information Administration released the latest U.S. inventory data for crude oil and fuel oil before the oil market was quiet. However, as investors in the U.S. oil and fuel inventory data were cautious ahead of the oil price’s rise is less than the first few trading days. The New York Mercantile Exchange in February light sweet crude oil futures settled up 26 cents, to 81.77 U.S. dollars a barrel, or 0.3%. ICE Futures Brent crude futures rose 46 cents to 80.58 U.S. dollars a barrel; February RBOB gasoline futures rose 2.29 cents to 2.1273 U.S. dollars per gallon, or 1.1%. February heating oil futures contract settled up 0.36 cents to 2.1941 U.S. dollars per gallon, or 0.2%.

From the Quality and Technical Supervision, Zhuhai City, Guangdong Province, was informed that the November 11, the National Standardization Technical Committee on Plastics (SAC/TC15) 2009 Annual Meeting held in Zhuhai. Chen Ying, Deputy Mayor of Zhuhai Municipal People’s Government to the meeting and welcoming remarks from the national plastics related industries experts, scholars and guests nearly 200 people attended the conference.

This annual meeting was held for the first time since the establishment of TC15 all members of the General Assembly, by a member as the unit of TC15 Yuan Kang Enterprise Co., Ltd. Zhuhai contractors. During the meeting, will have 10 plastic state standards and industry standards review of the eight plastic state standards and industry standards be revised. Zhuhai Yuan-kang enterprise is a modification of plastics in engineering research and development, production, testing high-tech enterprise, established China’s first set of engineering plastics manufacturing modified 6S management system, participated in the “plastic exposed to the atmosphere, sunshine and after the glass Fresnel Mirror test method “and other 5 plastic and revising national standards.

Annual meeting held in Zhuhai, Zhuhai in promoting the modification of plastics, particularly the engineering plastics business of independent innovation, improve market visibility, promotion of Zhuhai, as well as electrical and electronic industry, plastic industry, the optimization and upgrading of great significance. (Zhuhai Municipal Bureau of Quality Supervision Standardization Section)

The newly amended Energy Conservation Law since come into effect April 1. The revised energy conservation law, conservation of resources is China’s basic national policy. National implementation of the conservation and evelopment simultaneously, to give top priority to conservation of energy development strategies. The new Energy Conservation Law will help solve the current China’s economic development and energy resources and the environment increasingly acute contradiction. The revised Energy Conservation Law also stipulates that the state implement energy-saving target responsibility system and energy-saving appraisal system would be the completion of energy-saving target as a person incharge of local governments and their appraisal content.

LAS VEGAS – Computers gone wild! That was the theme at the recent Consumer Electronics Show in Las Vegas.

Years of boring desktop computers and predictable laptops got the most dramatic makeover from big and small-name manufacturers. The biggest engineering change was the use of smaller processors found in smart phones. If you think Netbooks were cool in 2009, then feast upon these innovative designs:

-Lenovo turned heads with the most impressive smart design in every kind of computer. HP and Dell should pay attention to the Chinese-once-IBM computer maker which is fusing the best designer minds from North America and China. Unquestionably, the IdeaPad U1 Hybrid Notebook is unique in that it is two computers-in-one. In its clamshell mode it runs off an Intel Core2 Duo chip and Windows 7 Premium and keyboard. But when the screen is detached from its transparent outer shell, it becomes an ultra light slate running on a smaller Qualcomm ARM Snapdragon processor (used in smart phones) and switches to Lenovo’s new Skylight interface. In slate mode it runs on Linux but looks and feels like Windows. It has its own second set of batteries and can synchronize its files with the base unit when connected again. The high-resolution 11.6” LED backlight display, 16:9 widescreen with integrated wec cam is two-finger multi-touch in either mode. It 1.7kg in notebook mode and only 750 grams in slate mode. Very cool.

Lenovo’s Ultra portable Skylight smart book, is also powered by efficient cell processors most of us have never heard of. It runs on a Lenovo user interface on Linux, although you wouldn’t know it when using it. One battery charge gives you 11 hours on the go. It has WiFi and always – connected cellular 3G. It basically bridges what has been missing between smart phones and Netbooks.

The Lenovo IdeaCenter A300 desktop is the first serious contender to iMacs. It features the thinnest all-in-one desktop 21.5″ screen and the computer guts are built in the swivel base. The optimized boot and shutdown process, rich multimedia capabilities including a face tracking web cam and HDMI in and out and easy system maintenance tools. With up to Intel® Core™2 Duo processors, the A300 comes with wireless Bluetooth keyboard and as well as the Lenovo Rescue System software to quickly and easily recover data if a document is lost or becomes corrupt.

-HP’s lackluster attempt to re-introduce the now eight-year old Tablet PC got a boost when shown as the only new device by Microsoft CEO Steve Ballmer during his keynote address at CES. But it won’t be around till fall and is not the much awaited and rumored Microsoft Courier Tablet PC. It resembled more a large eReader running on Windows 7 as did Dell’s similar effort. Both are called Slates. Industry observers called the hastily assembled Windows Slates an attempt to head off Apple’s expected announcement of its first tablet. But if you check Apples’ screen touch patents over the past two years, which go past traditional multi-finger touch to body and hand gesturing, you can imagine how advanced their Tablet will be.

-The most impressive eReader comes from springdesign.com and is ahead of its time. Called the Alex, it sports a 6-inch Electronic Paper Display and a fully functional 3.5-inch 320×480 LCD touch screen which can be turned off/on separately. This means WiFi Internet connectivity, web browsing, music and video to accompany the monochrome book screen. The ingeniously designed eReader also features built-in stereo speakers and will be available in February for $350 US. It includes 2GB or external microSD memory and headphones.

Canned beer, light body, transport, carry and easy to open, leading the fashion trend of consumption is beer packaging 3 car (bottles, cans and barrels), one of the horse.
To listen to two cans of domestic aluminum manufacture began in 1985, has invested 300 million U.S. dollars to introduce 13 cans production line, with production capacity of 11 billion aluminum cans. 2003 canned beer cans 2 billion, or more than 8%, higher than the growth rate of 5% of bottled beer, reflecting the domestic high-end beer market is expanding.

   With cans of beer brand Budweiser and Qingdao big to the top spot, respectively, 200 million and 400 million, of which Budweiser cans is rare in the world, the only of the leng-shaped tank, showing the world’s oldest beer distinguishes . Qingdao Beer took the lead in the domestic launch of 500 ml cans, through packaging innovation to better meet consumer needs in different capacities.

    With the increasing popularity of beer cans consumers, the domestic canning industry, a comprehensive out of the woods, Ball (BALL), CROWN (CROWN), historic constant (REXAM), Pacific (PACIFIC), joint (UNITED) and other foreign investment aluminum cans and steel cans Shanghai Bao-wing co-carved metal containers in domestic beer market.
Aluminum-based

     Aluminum has good processing and printing adaptability, suitable for high-speed, continuous automatic production, aluminum cans do not rust, corrosion-resistant, non-translucent, and preservation of security flavor, the product light weight, transportation, storage and security, to carry, use convenience, the old tin cans and recyclable waste recycling, are environmentally friendly. Thousands of liters of more than 20 domestic breweries are basically equipped with canned lines, the production of beer cans. Canned wine is superior sealing performance, clean sanitation, shelf-life period of 12 months to a large extent, to retain the fresh flavor of beer, it has attracted a growing urban middle-aged consumers.

     Aluminum cans are made of 0.28 millimeters from the membrane tank to listen to the specifications require a total of 10 steps: red cup, stretching, thinning stretch (three times), incision, primer, printing, necking, and flanging forming. Process as follows: red cup machine is made into aluminum cups, stretching machine to stretch thin the cup, incision, made of white cans, washing machines and white tank cleaning, coating machine in white cans coated with a layer of bottom paint, outside the printer according to different customers on the design for the printing of cans and outside India and oven drying cans printed patterns, jar via the spray machine to do within the coating, within the spray inside the oven drying, waxing machine Guankou wax along the edges, necking machines and flanging machines finally shut flanging, each finished tank is through optical inspection procedures, the computer-ray inspection machine will automatically remove the products with unsatisfactory test qualified to listen to the child the last entry Automatic stacking machine packaging. Can the rate of domestic plants are 900cpm above.

Packaging Process

      Cans of beer packaging technology and the drum more simple than bottled and easier to control. An automated cans line the main equipment consists of unloading stacking machine, pot liquor – Volume sealing machine, sterilizing machine, packing machine / sealing machine composition, filling speed can be achieved 1000cpm, and listen to sub-par canning factory.

      The process of beer cans as follows: unloading the stack machine code layer cans removed from the plastic tray, the push into the polymer chain, on-board into the washing machine with hot water 80oC wash, pouring dry up sterile. Then uses CO2 isobaric filling the air carbon dioxide replacement tank, canned, the spray foam to carbon dioxide cited Guankou quickly sealed. Detected by automatic quantitative level, followed by pasteurization (sterilization spray). After filling the child has been listening to air-dry machine dry, then spray on the inkjet printer in the tank at the end of production time.

       According to the package form, using different packing machine: single die-cut cardboard is a kind of wrapping-type, listen to the child down to a big cardboard surface, mechanical rod in turn to another Omo, and both sides of the face lift wrapped together, heat Sol-makers quickly bonded joints and pan lid. Wrapping type widely used in domestic breweries, by the German Kisters companies. There is also a Knock Down (manufacturer joints in good shape box carton factory stick), packing machine Omo sucker will adsorption into the hollow, mechanical push rod inward to listen to the child, and then bonding, this packing efficient method, widely used abroad. Wrapping type packing machine can also be packaged with a paper tray of hot plastic film to listen to boxing, this time packing machine is equipped with a set of required PE film slitting, Shrink Wrapping systems and furnaces. If the PE film surface in print, you need to configure the photoelectric eye device. After auto-boxing, after bonding, listen to me in general no longer in use OPP Packing tape. A typical 355ml canned 24 cans, there are 18 and 12 cans, the main consumer FCL purchase habits.

       Widespread use of computer technology in modern beer recognition system and digital display equipment to help mechanized filling operation, to ensure beer quality in the filling process is not affected. Unloading to listen to listen to the following functions automatically detect manufacturing defects tank: oil, liquid, deformation, foreign bodies, and the smell, will fail the container removed from the line.

      After listening to empty the liquid in the wash before the test, using clean water rinse brewing inside of the empty listening.

      Air to listen to using CO2 cleaning, maintenance and pressure, and then Guanjiu; other Guanjiu after another through the pressure relief, broken bulbs, and then seal stamped volumes. 355ml volume to listen to the contents of tolerance should be controlled within ± 8ml, CO2 in the 2.65-2.85 between, OG for 10.7-11.0, TPO control less than an average of 134ppb. Guanjiu and volume are closely connected with the closure of the movement, the machine suppliers to KHS majority.

       HEUFT level detector to listen to the content of the role include the detection of volume, automated sampling, recording each wine filling defects in the number of valves.

       Beer sterilization process sub-warming, 62oC sterilization temperature and cooling trilogy, sterilization undue influence beer flavor, should control the quality of indicators: PU (8-10), MPT (141 ± oC), BOT ≤ 27oC.

       Sterilization after the detection of liquid level measurement from a single Filtec heavy instrument control, it automatically bound by the hearing level less than wine.

       Coding defects are mainly Coding vague, leak spray, Coding errors and Coding position not equal. Coding for high-resolution small character inkjet printer is mainly the Vediojet.

In other countries, food packaging safety and food quality and safety are eually important. To protect food safety, the world is not only the quality of the food itself, made more stringent hygiene requirements, while its packaging has also developed a very high standard, put forward strict requirements, and some require the implementation of some developed countries has become technical barriers to trade one of the means.
    Food packaging includes plastic bags, paper bags, aluminum foil bag, glass, ceramic bottles, tin cans, plastic film, etc. in packaging and materials, as well as cardboard boxes, plastic barrels, steel drums and other packaging and materials, these packaging materials in the because of excessive harmful ingredients may affect the quality of food, damage to human health. The major countries of China’s food exports the United States, Japan and the European Union, these countries import food packaging have recently issued a series of technical regulations and measures to strengthen the safety of imported food packaging management.
    International Organization for Standardization: August 2009, the International Organization for Standardization ISO in the HACCP standards of safety management system developed based on the “food safety management systems – on the food chain requirements of any organization” (ISO22000). ISO22000 is a voluntary international standard, is a new food safety management system standard defined the common food safety management requirements, it is intended to ensure that the food supply chain, there is no weak link in the food chain covering the whole process, that is planting , breeding, primary processing, manufacturing, distribution, until consumer use, including food. The standard for global food safety management system proposed a unified standard, and to promote global enterprises to be more simple and consistent manner HACCP.
    EU: for the printing ink applied to almost all the food packaging, but it contains heavy metals, residual solvents, volatile organic compounds, as well as a large number of polycyclic aromatic hydrocarbons and other toxic and harmful chemicals to migrate through the chemical pollution of food contents, including benzene residue great harm on people could easily cause a cancer, a diseases, the EU created the largest food packaging printing ink transfer value, the provisions of food packaging materials, printing inks in the 4 – methyl-benzophenone and benzophenone the overall migration limit value must be less than 0.6 mg / kg. The current international limits on the printing ink, permitted or prohibited substances and evaluation method of containing a consensus has not been established standards, our regulations in that regard also in vacuum.
    Europe and the United States: a result of organic chemical raw material bisphenol A (BPA) may cause the human heart, liver and other diseases, the U.S. Food and Drug Administration asked in December 31, 2009 prior to assessing the risks of bisphenol A, the country’s states will gradually prohibition of food containers and drink containers containing the substance. Following the United States, Canada announced a ban in food packaging and contact materials, the use of bisphenol A, the French Parliament also submitted a motion to ban in food packaging and contact materials, the use of Bisphenol-A.
    The United States: will be implemented during the year 2009 “the United States 2009 Food Security Enhancement Act” stipulates that foreign exports to the U.S. food companies, including pet food production, packaging, warehousing companies must annually to the FDA (U.S. Food and Drug Administration) registration. In addition, the United States country of origin labels are mandatory requirement from March 16, 2009 starting on meat, minced beef, chicken and mutton, pork, wild and farmed fish and shellfish, perishable agricultural products (12.82 , 0.34,2.72%) (fresh and frozen fruits and vegetables), ginseng, peanuts, and other pre-packaged name of the country of origin labeling mandatory, provides for retailers and product suppliers record-keeping requirements, violations of provisions of suppliers and retailers shall be punished by a fine of up to 1000 U.S. dollars.
    Japan: Japan is the world’s most one of the countries pay attention to packaging. Japan’s “Food Sanitation Law” clearly asks, food packaging can not be too fancy to be tasteless, but when printing food packaging must use a special ink, that is, alcohol-soluble ink must be replaced by toluene solvent inks more stable, non – likely to be volatile harmful substances.
    Japan in particular, require children to color can not be too much food packaging, clamshell packaging, have a separate inner membrane. In addition, the Japanese phenomenon of fraud against the company in the country, on December 25, 2008 to further regulate the labeling the country of origin marking.
    United Kingdom: United Kingdom Ministry of Agriculture, Food and Nutrition labeling scheme is more complete visual display to require supermarkets and food enterprises to the production or sale of food products labeled more clearly the information labels, and called for more clearly marked in food calories, protein, carbohydrate, fat total, saturated fat, sodium, cholesterol, sugars, dietary fiber and calcium content of nutrients and units. January 6, 2009, said British Environment Minister HilaryBenn, food companies and supermarkets must indicate the true origin of food products, the company should be clearly stated on the label on the product country of origin of the initial composition, rather than the ultimate producer.
    France: France announced since January 1, 2010 onwards, will prohibit the use of non-biodegradable plastic materials, packaged foods, agricultural products, replaced by environmentally friendly biodegradable materials completely replace. In addition, food packaging introduced a new text description requirements for food packaging to display the business name of food, while also indicating its legal name, and also provides the volume of the box must be broadly consistent with the volume of food itself may not be used beyond the excessive volume of food itself box packaging.
    Impact
    Foreign food packaging made increasingly stringent new requirements, new standards, although the objective to promote China’s exports of food and packaging industries to a more healthy, safer, more environmentally friendly direction, and gradually integrated into the international and standardized the development of track, however, due to the developed countries a high level of food safety management in the food packaging management, has produced some of the demanding requirements of the protective effect of trade restrictions and, in the objective has become more important in international food trade, a new type of technical trade barriers.

Packaging industry of a country’s level of development and packaging design, research and development philosophy, which was the country’s economic life, an important symbol in the degree of civilization. Packaging industry to cover not only the packaging product design, production, packaging and printing, packaging and supply of raw and auxiliary materials, packaging machinery and packaging equipment manufacturing and other areas of production, packaging products is also involved in the first to the third industry, the flow of goods each link. Right after use of packaging materials disposal, recovery and recycling of the packaging industry is a permanent social responsibility. Therefore, the packaging industry’s development and the global economy – body-oriented and sustainable development of human society is closely related to. Packaging industry as a “sunrise industry” is bound to the global manufacturing industry and its products, the international flow of produce can not be underestimated role. To quickly reduce the domestic confectionery, chocolate products and the gap between the developed countries, and only take the road of technological innovation. In the future, the domestic candy, chocolate packaging trends will inevitably toward the high-speed automated packaging machine, a machine more versatile and packaging design features of direction.

First of all, candy, chocolate manufacturers of standardized products for packaging, generally require high-speed, automated packaging machine in pursuit of economies of scale packaging cost optimization. Thus, in recent years, manufacturers of packaging machines has developed different types of products suitable for high-speed, automatic candy, chocolate packaging machine, such as that for the traditional pillow packaging and products which are suitable for double-kink kink used in packaging machines. In such packaging machine manufacturers today use the latest technologies, such as full-servo motors, electro-optical tracking, high-speed camera, so as to achieve the packaging machine performance, there are already 1500 ~ 2000 per minute, high-speed hard candy pillow type packing machine . High-speed pillow packing machine chocolate is more cold air from the equipment and packaging films, etc. to match the development, in order to achieve high speed without affecting the quality of chocolate products. In addition, and chocolate packaging machine conveyor belt connected to the automatic steering, organize, emergency stop, speed has also been widely used. Second, for non-standard or seasonal products, packaging machine should be flexible, and is characterized by light and compact. The type of packaging machine is not the pursuit of speed, but rather to seek personalized packaging and flexible adaptability. In addition, the originality of the packaging design in order to meet the commodity competition, unceasingly, requesting different, giving a strong visual impact, such as bottled xylitol chewing gum on the market today, due to improvements in packaging suitable for the younger generation of consumer psychology, the products are very popular .

The current outer form of candy packaging mainly Pillow Bag (traditional), and vertical bags (chocolate are more), with which the use of vertical bag apart from the Spanish Barbosa CADBURY automatic packaging equipment, other companies (including: NESTLE, MARS, HERSHEYS, LECONTE, etc.) are based on pre-packed bags and then manually. Candy, chocolate packaging according to the market, depending on packaging techniques determined by product characteristics. Chocolate and candy packaging products, primarily its market positioning, the product’s own requirements, and the value of packaging and other factors. For example, if the product is positioned as a high-end consumer gift, then the packaging will adopt the look and feel more attractive, more high-end packaging forms, such as  paper packing box, wooden packing box, plastic boxes or metal boxes are on the election.

As for the mass consumer products, packaging will be relatively simple, such as the Pillow bag is a popular favor packaging businesses in the form of simple and mature technology, packaging, high efficiency, and the price is cheap. In addition, some products used in packaging technology also depends on the characteristics of the product itself. For example: chocolate products at higher temperatures will produce fat deposition, affecting the quality and appearance of packaged chocolate Pillow bag so commonly used cold-seal technology. Overall, the future form of candy packaging will be to diversify the direction of development, and packaging equipment will also be toward multi-functional, high performance, automated direction.

Fresh corn contains a lot of natural vitamin E, can promote cell division, delaying cellular senescence, reduce serum cholesterol.

Corn contains a lot of cellulose, can reduce the cholesterol concentration and deposition to prevent or reduce atherosclerosis, prevent high blood pressure, cerebral infarction and coronary heart disease and other cardiovascular and cerebrovascular diseases. And to stimulate the digestive power will help discharge toxins from the body. Maize glutathione contained carcinogenic substances can be excreted from outside, is conducive to anti-cancer; Corn also contains carotene (in the human body can be converted into vitamin A), lutein,zeaxanthin and so on, can effectively prevent age-related macular diseases and so on, and enhance visual acuity. For long-term use of computers who want to eat.
Material: canned sweet corn, sweet pepper, onion, sweet salad dressing or oil Kewpie Dressing

Practices:

1, sweet corn, canned food, sweet pepper, onion in advance Fang Bingxiang freezer of ice a night.

2. Sweet pepper, onion cut small, and sweet corn with the box or on the salad box.
3. Join the Cupid sweet salad dressing, or oil Dressing. Oil Dressing transfer method, see Fashion Oil Dressing – Tomato Cheese Salad
4. Mix can be.
Tips:

1, not used to sweet pepper and onion that can be replaced with cucumber, carrots, can also be based on personal taste into the amount of raisins.

2, there is no canned sweet corn you can buy some frozen sweet corn kernels children. The corn kernels into the boiling water over the pot look, remove, control of water can be used dry.